Legacy LA589 800 Watts 2 Channel Bridgeable MOSFET Amplifier

Legacy LA589 800 Watts 2 Channel Bridgeable MOSFET Amplifier Review

See more picture @ amazon.com

400W x 2 Output @ 2 Ohms800W x 1 bridged Output @ 4 Ohms 2 Ohm Stable MOSFET Power Supply FULL/HPF/LPF X-over Switch Variable Hi-Pass : 40 Hz-250 Hz Variable Low-Pass : 40 Hz-250 Hz Variable Input Level (Gain) Control : 6V-200mV Bass Boost Selector : 0/+18dB Thermal / Overload / Short Circuit Protection Soft Turn On/Off Power & Protection LED Indicator Low Level RCA Input : 10K Ohms Line Level RCA Output Frequency Response : 15 Hz-30K Hz Signal to Noise Ratio: >95dB THD:0.1 % 2x20 Amp Maxi Type Fuse Slim Size Amplifier Design For Easy Installation Dimensions: 10.74''W x1.69''H x 7.5''L

Boss AR1600.4 ARMOR 4-Channel 1600-Watt MOSFET Amplifier

Boss AR1600.4 ARMOR 4-Channel 1600-Watt MOSFET Amplifier Review

See more picture @ amazon.com

Boss AR1600.4 ARMOR 4-Channel 1600-Watt MOSFET Amplifier Feature

• 4-Channel MOSFET Bridgeable Power Amplifier
• Remote Subwoofer Level Control Included
• 400W x 4 Max Power
• 160W x 4 RMS Power
• 800W x 2 Max Bridged Power

Why sacrifice performance for the sake of convenience? with a slimmer chassis, ARMOR is the perfect amplifier when space is limited, and power is required. Indeed, this combination of feature-rich performance and put-it-anywhere convenience is hard to find in the automotive environment; so much so that the ARMOR may well be forging its own product category.

Pyle PLMRMP1A 2-Channel Waterproof MP3/iPod Marine Power Amplifier

Pyle PLMRMP1A 2-Channel Waterproof MP3/iPod Marine Power Amplifier Review

See more picture @ amazon.com

Pyle PLMRMP1A 2-Channel Waterproof MP3/iPod Marine Power Amplifier Feature

• Marine amplifier delivers 2 x 100 Watts RMS at 4 Ohms, 2 x 200 Watts Max at 4 Ohms, 2 x 300 Watts RMS at 2 Ohms
• Power protection circuitry with anti-thump turn-on and soft turn-off to protect your speakers
• Accepts RCA line inputs and includes a 3.5mm-to-RCA adaptor so you can plug in your MP3 player or iPod easily
• Also accepts standard high- and low-level inputs from marine head units
• Includes wired remote control for adjusting volume gain

This two-channel waterproof MP3/iPod marine amplifier makes a great basic marine audio setup, or a simple expansion solution for an existing head unit. Features high- and low- level inputs, RCA line input, and protection circuitry for power on/off.

This two-channel waterproof MP3/iPod marine amplifier makes a great basic marine audio setup--easily connect your iPod or MP3 player. Click here for a larger image

Includes amplifier, wired remote, 3.5mm to RCA adapter.

Basic Marine Amplification

Plenty of Power in a Small Package

The PLMRMP1A packs a surprising 200 watts max (at 4 ohms) for each of its two channels, surprising for an amplifier of its size--just 4.13 x 3.35 x 1.38 inches.

MP3 Player or Receiver Ready

The PLMRMP1A takes RCA line inputs and includes a 3.5mm-to-RCA adaptor, so you can plug in your MP3 player or iPod easily, for a quick and easy music solution. It also takes standard high- and low-level inputs from marine head units, so it can be used for system expansion. A simple two-way switch gets your input level set up for either option.

Protection Circuitry

For safety, this amp is equipped with power protection circuitry. An anti-thump turn-on and soft turn-on prevent any damage to your speakers.

Remote Included

This amplifier also includes a wired remote control, for adjusting volume gain.

Pyle PLMRMP1A Select Specifications

Power Rating:	2 x 100 Watts RMS at 4 Ohms 2 x 200 Watts Max at 4 Ohms 2 x 300 Watts RMS at 2 Ohms
T.H.D:	< 0.05%
S/N Ratio:	> 95dB
Channel Separation:	> 65dB
Frequency Response:	10Hz- 40kHz
Fuse:	10A
Dimensions:	4.13 x 3.35 x 1.38 Inches (L x W x H)

What's in the Box

Pyle PLMRMP1A Two-Channel Waterproof MP3/iPod Marine Power Amplifier, Waterproof 3.5mm Stereo to RCA Adaptor, Remote Control for Volume Gain, Documentation

This 2-channel waterproof MP3/iPod marine amplifier is a powerful addition to your marine audio setup. It pushes 200 watts maximum on each of the two channels for a bone-rattling power that’s basically unmatched. It takes RCA line inputs and includes a 3.5mm-to-RCA adaptor so you can plug in your MP3 player or iPod easily. Also takes standard high and low level inputs from a marine head-unit. Comes with a wired remote control for volume gain. For safety, this amp is equipped with power protection circuitry and soft turn on/off prevents damage to your speaker equipment.

Boss PH4000D Phantom 4000 Watt Class D Monoblock Amplifier with Remote

Boss PH4000D Phantom 4000 Watt Class D Monoblock Amplifier with Remote Review

See more picture @ amazon.com

Boss PH4000D Phantom 4000 Watt Class D Monoblock Amplifier with Remote Feature

• Monoblock Phantom amplifier with Class D power supply
• Delivers 4000 Watts at 1 ohm; 3000 Watts at 2 ohms; 1600 Watts at 4 ohms
• Line and speaker level inputs with variable gain control
• Low-pass variable crossover; 18dB bass boost
• Includes remote sub control

New for 2010, Boss Audio's Phantom power amplifiers cover a wide variety of applications. Four- and two-channel full-range models will match perfectly with your speaker system. MOSFET amplifiers deliver plenty of power, while bass boost and built-in high- and low-pass crossovers allow you to customize your cabin acoustics to your taste. For the ultimate in power, Boss offers Class D monoblock amplifiers like the PH4000D.

A Class D monoblock amp with 4000 watts peak power. Click to enlarge.

Phantom amps include a remote subwoofer level control.

Remote Subwoofer Level Control
Phantom amps include a remote subwoofer level control for easy level adjustments.

Subsonic Filter
Trim the signal of unusable bass--below human hearing range and taxing to audio systems--for further efficiency with the Subsonic filter.

Variable Phase Shift Control
Allows you to change the output phase from 0 to 180 degrees to help compensate for the timing difference between drivers.

Line/Speaker Level Inputs
Separate line and speaker level inputs mean the amplifier can handle high-level signals from receivers lacking RCA outputs.

Variable Low-Pass Crossover
Keep high frequencies from your sub with a variable crossover.

Variable Gain Control
Allows you to match the input gain to your receiver for better sound with less distortion.

Class D Power Supply
For high performance with low heat.

Bass Boost
Add a little extra low-end power with 0 to +18dB of variable bass boost.

Power and Protection LEDs
Protection LEDs let you know when there's a problem.

Strapping Capability
Strap two amps together for twice the power.

What's in the Box
Boss PH4000D Amplifier, Subwoofer Level Control, User's Manual Boss PH4000D Phantom 4000 Watt Class D Monoblock Amplifier with Remote

Mitzu Mit-75r 2 Channel 500 Watt Car and Motorcycle Audio Amplifier

Mitzu Mit-75r 2 Channel 500 Watt Car and Motorcycle Audio Amplifier Review

See more picture @ amazon.com

Mitzu Mit-75r 2 Channel 500 Watt Car and Motorcycle Audio Amplifier Feature

• 500 W Peak Power
• Power ON LED Indicator
• High/Flat/Low Pass Built-in
• Dimensions: 4"L X 3"W X 1 5/8"H
• High and Low level inputs

The Mitzu MIT-75R 2 Channel 500 Watts amplifier is a small amplifier that is able to reproduce sound very nicely. This amp can be used with motorcycles, cars, ATV, golf carts, or anywhere where you need a small car audio amplifier to help you have a good listening experience. You can use an iPod or MP3 player or any other audio source that has RCA type audio output. If you are using an iPod you will need an RCA to 3.5mm cable.

Lanzar HTG237 1,000-Watt 2-Channel Mosfet Amplifier

Lanzar HTG237 1,000-Watt 2-Channel Mosfet Amplifier Review

See more picture @ amazon.com

Lanzar HTG237 1,000-Watt 2-Channel Mosfet Amplifier Feature

• 2 x 125W RMS @ 4 OHMS - Bass Boost Circuit - Low Pass Filter Controls - S/N Ratio: >90dB - Subwoofer Remote Level Control
• 2 x 500W Max @ 4 OHMS - Bridgeable at 4 Ohms - High Pass Filter Controls - Channel Separation: >65dB - Fuse: 25A x 1
• 1 x 1000W Max @ 4 OHMS Bridged - 2 Ohm Stereo Stable - Power and Protection LED Indicators -
• 2 x 225W RMS @ 2 OHMS - Gold RCA Inputs - Soft Turn-on/Turn-off - HPF Freq. Response: 80KHz
• Electronic Crossover Network - Line Outs for Left and Right Channel - THD: <0.01%. -
• Freq. Response: 10Hz~45KHz - Dimensions: 9.84''(L) x 2.24''(H) x 8.81''(W)
• LPF Freq. Response: 50Hz-250Hz

If you're looking for both quality and power, this dynamic 1000-watt, 2-channel MOSFET amplifier is it. Versatile and powerful, this high-performance amp provides depth and feeling to your music. You'll be amazed at the clarity and richness of the bass this amp produces with its state-of-the-art bass boost circuit. Perfect for competitions, this affordable and durable amp provides a rich sound at all volumes, and is easy to configure yourself. The HTG237 is equipped with safety and security features, including LED indicators and advanced protection circuitry. Blow the competitors away with an elite amplifier that's one of Lanzar's top-sellers - and for good reason. The MOSFET pulse width modulation power supply pumps a clean, distortion-free signal to your speakers The unit also includes a bass-boost remote, low- and high-pass filters, and tons of other great features. This amp is made to last, and once you upgrade your system with a Lanzar amplifier, you'll wonder how you ever lived with low-resolution sound before.

Boss AR1600.2 ARMOR 2-Channel 1600-Watt MOSFET Amplifier

Boss AR1600.2 ARMOR 2-Channel 1600-Watt MOSFET Amplifier Review

See more picture @ amazon.com

Boss AR1600.2 ARMOR 2-Channel 1600-Watt MOSFET Amplifier Feature

• 2-Channel MOSFET Bridgeable Power Amplifier
• Remote Subwoofer Level Control Included
• 800W x 2 Max Power
• 260W x 2 RMS Power
• 1600W x 1 Max Bridged Power

Why sacrifice performance for the sake of convenience? with a slimmer chassis, ARMOR is the perfect amplifier when space is limited, and power is required. Indeed, this combination of feature-rich performance and put-it-anywhere convenience is hard to find in the automotive environment; so much so that the ARMOR may well be forging its own product category.

Power Acoustik D1-3000 Demon 3000 Watt 1 Channel Class D Monoblock Amplifier

Power Acoustik D1-3000 Demon 3000 Watt 1 Channel Class D Monoblock Amplifier Review

See more picture @ amazon.com

Power Acoustik D1-3000 Demon 3000 Watt 1 Channel Class D Monoblock Amplifier Feature

• Strapable: Join Two together for Double the power!
• Three-Way Protection Circuitry
• Eyes Light up!
• Bass Control Knob - Dash Mount
• MOSFET Power Supply, 2 Ohm Stable

Demon 3000 Watt 1 Channel Class D Amplifier with Music so powerful it makes the dead come to life! Try the all new Demon amplifiers, loaded with the features you expect on models priced much higher than this exquisite amplifier. We provide all the necessary features, including remote mount bass control knob, variable 12dB Crossovers, and 1-0hm stable on all class D amps. Full variable crossovers, with 18db. Bass boost and dash mounted sub woofer control. Sporting a new hairline anodized Candy Apple finish with Skull logo and piercing eyes that light-up when the amp is on.

Hifonics HFi1000 Hfi Series D-Class Mono Amplifier 1 x 475 @ 4 OHMS, 1 x 750 @ 2 OHMS, 1 x 1000 @ 1 OHM

Hifonics HFi1000 Hfi Series D-Class Mono Amplifier 1 x 475 @ 4 OHMS, 1 x 750 @ 2 OHMS, 1 x 1000 @ 1 OHM Review

See more picture @ amazon.com

Hifonics HFi1000 Hfi Series D-Class Mono Amplifier 1 x 475 @ 4 OHMS, 1 x 750 @ 2 OHMS, 1 x 1000 @ 1 OHM Feature

• 4/2/1 Ohm Stable
• 1000 Watts
• Bass EQ with 45 Hz Bass Boost
• Bass Remote Included
• Illuminated Logo

Hifonics Hfi Series D-Class Mono Amplifier 1 x 475 @ 4 OHMS, 1 x 750 @ 2 OHMS, 1 x 1000 @ 1 OHM