BAZOOKA MA-AIC-AMK Amplifier Kit

BAZOOKA MA-AIC-AMK Amplifier Kit Review

BAZOOKA MA-AIC-AMK Amplifier Kit Feature

• Energy efficient
• Uses colored LEDs to indicate whether the seat is up or down
• Turns on when user approaches in the dark turns off after users leave
• Shines gentle yet sufficient light Requires 2 AA batteries

BAZOOKA MA-AIC-AMK Amplifier Kit

Boss PH5000D Phantom 5000 Watt Class D Monoblock Amplifier with Remote

Boss PH5000D Phantom 5000 Watt Class D Monoblock Amplifier with Remote Review

Boss PH5000D Phantom 5000 Watt Class D Monoblock Amplifier with Remote Feature

• Monoblock Phantom amplifier with Class D power supply
• Delivers 5000 Watts at 1 ohm; 3500 Watts at 2 ohms; 1800 Watts at 4 ohms
• Line and speaker level inputs with variable gain control
• Low-pass variable crossover; 18dB bass boost
• Includes remote sub control

New for 2010, Boss Audio's Phantom power amplifiers cover a wide variety of applications. Four- and two-channel full-range models will match perfectly with your speaker system. MOSFET amplifiers deliver plenty of power, while bass boost and built-in high- and low-pass crossovers allow you to customize your cabin acoustics to your taste. For the ultimate in power, Boss offers Class D monoblock amplifiers like the PH5000D.

A Class D monoblock amp with 5000 watts peak power. Click to enlarge.

Phantom amps include a remote subwoofer level control.

Remote Subwoofer Level Control
Phantom amps include a remote subwoofer level control for easy level adjustments.

Subsonic Filter
Trim the signal of unusable bass--below human hearing range and taxing to audio systems--for further efficiency with the Subsonic filter.

Variable Phase Shift Control
Allows you to change the output phase from 0 to 180 degrees to help compensate for the timing difference between drivers.

Line/Speaker Level Inputs
Separate line and speaker level inputs mean the amplifier can handle high-level signals from receivers lacking RCA outputs.

Variable Low-Pass Crossover
Keep high frequencies from your sub with a variable crossover.

Variable Gain Control
Allows you to match the input gain to your receiver for better sound with less distortion.

Class D Power Supply
For high performance with low heat.

Bass Boost
Add a little extra low-end power with 0 to +18dB of variable bass boost.

Power and Protection LEDs
Protection LEDs let you know when there's a problem.

Strapping Capability
Strap two amps together for twice the power.

What's in the Box
Boss PH5000D Amplifier, Subwoofer Level Control, User's Manual Boss PH5000D Phantom 5000 Watt Class D Monoblock Amplifier with Remote

Pyramid PB70 150 Watt Power Amplifier/Booster

Pyramid PB70 150 Watt Power Amplifier/Booster Review

Pyramid PB70 150 Watt Power Amplifier/Booster Feature

• Power On/Off Bypass Switch
• LED Indicator
• 150 Watts Amplifier
• Rotary Bass/Treble Control
• Built-in Heavy Duty Heatsink

75 Watts x 2 Channel OutputTransformerless Direct Coupled idge Type Amplifier/Booster Sleek Compact Design Rotary Bass Treble Control Power On/Bypass Switch Power On LED Indicator For 12VDC Negative Ground Systems Can Be Mounted Under Dash Connects Between Car Radio Speakers Easy Installation Accepts High or Low Impedance Inputs Gold Plated RCA Jacks Built-in Heavy Duty Heatsink Dimensions: 4.5-Inch W x 1.75-Inch H x 6.65-Inch L

Pyramid Deluxe Amplifier/Installation Package for Car/Truck/SUV -- PB915X 1200W 2 Channel Bridgeable Amplification + PBIN2 1200W 20 ft. Amplifier Hookup Kit for Battery Unit & Speakers

Pyramid Deluxe Amplifier/Installation Package for Car/Truck/SUV -- PB915X 1200W 2 Channel Bridgeable Amplification + PBIN2 1200W 20 ft. Amplifier Hookup Kit for Battery Unit & Speakers Review

Pyramid Deluxe Amplifier/Installation Package for Car/Truck/SUV -- PB915X 1200W 2 Channel Bridgeable Amplification + PBIN2 1200W 20 ft. Amplifier Hookup Kit for Battery Unit & Speakers Feature

• PB915X: Two Channel Bridgeable Amplification, Tri-way Configuration:1/2 Channels, 2 X600 Watts Total Output @ 4 Ohms, 1200 Watts Total System Output @ 4 Ohms, Variable Gain Control,
• MOSFET Pulse Width Modulated Power Supply, 2 Ohm Stereo Stable, Built-In Variable Subwoofer Crossover, High Level Low Impedance MOLEX, Input Connector, CA Low Level Inputs, Speaker Output Terminal Strip,
• Overload Protection, Thermal Protection, Short Circuit Protection, Power On LED Indicator, LED Diagnostic Condition Indicator, Automotive Type Fuse Protection.
• PBIN2: 20ft 8 Gauge Red Power Wire, 4ft 8 Gauge Black Ground Wire, 20ft 16 Gauge Blue Remote Turn-on, 20ft 12 Gauge Speaker Wire, 20ft Right Angle RCA Interconnect Audio Cable, 6ft Black Split Loom Cable Conduit,
• AGU Type 60A Gold Plated Fuse, Water Resistant In-line Fuse Holder, 2 Ring Terminals: 8 G, 2 Spade Terminals: 8 G, 5 Spade Terminals: 14-16 G, 3 Butt Connectors, 20 Cable Ties, 1 Black Grommet.

PB915X Dimensions: 7.87"L 9.45"W 2.09"H

Lanzar OPTI100X4 Optidrive 800 Watt 4 Channel Competition Class Mosfet Amplifier

Lanzar OPTI100X4 Optidrive 800 Watt 4 Channel Competition Class Mosfet Amplifier Review

Lanzar OPTI100X4 Optidrive 800 Watt 4 Channel Competition Class Mosfet Amplifier Feature

• 100 Watts x 4 RMS Power @ 4 Ohms - Bass Boost Circuit - line Outs for Left and Right Channels - Soft Turn On/Off - Frequency Response: 10Hz - 35kHz - Fuse Rating: 25A x 3
• 200 Watts x 4 Max Power @ 4 Ohms - Bridgeable at 4 Ohms - Low Pass Filter Controls - Minimum Speaker Impedance: 2 Ohms - Variable Low Pass Filter: 50Hz~120Hz, 24dB/Octave - Dimensions: 10.08'' (W) x 2.12'' (H) x 15.75'' (L)
• 400 Watts x 2 Max Power @ 4 Ohms Bridged - 2 Ohm Stereo Stable - High Pass Filter Controls - THD: 0.04% - Variable High Pass Filter: 50Hz~750Hz, 24dB/Octave
• 175 Watts x 4 Watts RMS Power @ 2 Ohms - Double Sided Epoxy PCB Circuit Board - Subwoofer Remote Level Control - S/N Ratio: 100dB - Variable Bass Boost: 0 to 18dB
• Electronic Crossover Network - Gold Plated RCA Inputs - Power and Protection LED Indicators - Channel Separation: 60dB - Input Sensitivity: 200mV ~ 8V

Lanzar's newly designed Optidrive amplifiers bring both quality and power -- this dynamic 800 watt, 4-channel amplifier is it. Versatile and powerful, this high-performance amp delivers high fidelity audio with unprecedented clarity. You'll be amazed at the textures and richness of the bass this amp produces with its state-of-the-art bass boost circuit and electronic crossover network. The amplifier also comes with protection -- offering power protection LED indicators and advanced protection circuitry. Blow the other competitors away with an elite amplifier that's one of Lanzar's top-sellers for good reason. The unit also includes remote subwoofer bass control, variable high/low pass crossover controls, and tons of other great features.

Lanzar VCT2310 3000 Watt 2 Channel High Power MOSFET Amplifier

Lanzar VCT2310 3000 Watt 2 Channel High Power MOSFET Amplifier Review

Lanzar VCT2310 3000 Watt 2 Channel High Power MOSFET Amplifier Feature

• 5 Position Electronic Adjustable Panel
• 16 - 9 Wide Screen
• Full Function OSD Touch Screen
• High Resolution and High Definition Picture capability
• DVD/SVCD/VCD/CD/CDR/CDR/RW Player Built-In ESP (Electronic Shock Protection)

1500W x 2 Output @ 2 Ohms 3000W x 1 bridged Output @ 4 Ohms 2 Ohm Stable MOSFET Power Supply High/Low/Full Crossover Switch Variable Hi-Pass:40 Hz-250 Hz Variable Low-Pass : 40 Hz-250 Hz Variable Input Level (Gain) Control : 6V-200mV Variable Bass Boost:0~+18dB Variable Subsonic Filter : 10Hz~100Hz, 24dB/Octave Sub Sonic Switch Thermal / Overload / Short Circuit Protection Soft Turn On/Off Power & Protection LED Indicator Low Level RCA Input : 10K Ohms Line Level RCA Output Frequency Response : 15 Hz-30K Hz Signal to Noise Ratio: >95dB THD:0.1 % 2x50 Amp Maxi Type Fuse Slim Size Amplifier Design For Easy Installation Dimensions: 10.63''W x1.75''H x 15''L

PYLE PLMRA400 400 Watt 4 Channel Waterproof Marine/Car Amplifier

PYLE PLMRA400 400 Watt 4 Channel Waterproof Marine/Car Amplifier Review

PYLE PLMRA400 400 Watt 4 Channel Waterproof Marine/Car Amplifier Feature

• PYLE PLMRA400 4 Channel Waterproof Amp Marine/Car Amplifier
• 400 Watts Output Power (100 Watts x 4 Channels)
• Heavy Duty Aluminum Alloy Heatsink
• Gold Plated Speaker Terminals & Low Level RCA Inputs - High Level Inputs
• Full Manufacturer's 1 Year Warranty

This Pyle Hydra amp will power your speakers on the dock, in your boat, or by the pool--it's completely waterproof. This 4-channel, 400-watt marine amp takes both high- and low-level inputs, so it's compatible with a variety of head units and sources. Remote turn/on off makes controlling the amp a breeze, and gold-plated RCA inputs mean it won't be a weak link in your setup.

Power your speakers on the dock, in your boat, or by the pool. Click here for a larger image

View a connection diagram. Click here for a larger image

Input Options

The PLMRA400 features low-level RCA inputs for sources that use RCA-type connectors. If your marine receiver lacks RCA output jacks, you can connect speaker output leads to the high-level terminal inputs.

Input Level Control

Adjust the line level input for the least amount of distortion to match your source unit.

Protection

Protect the amp and your vehicle's electrical system from short circuit conditions with built-in fuse protection, along with overload, thermal and short circuit protection. A heavy duty aluminum alloy heatsink helps prevent any thermal issues.

4 or 8 Ohm Speaker Impedance

The PLMRA400 is ready for either 4- or 8-ohm speakers, in pair.

Remote Turn-On/Off

Wire the PLMRA400 to turn on and off in tandem with your receiver/head unit.

Pyle PLMRA400 Select Specifications

Power Rating:	100 Watts x 4 Maximum
Power Supply Voltage:	14.4V DC Neg. Ground (10.5-16V)
Frequency Response:	15 Hz-30 KHz
Input Impedance:	Low Level: 10K Ohms High Level: 100 Ohms
Input Sensitivity:	Low Level: 250mV High Level: 2.5V
Dimensions:	7.87 x 2 x 8 Inches (L x W x H)
Weight:	3.3 lbs.

What's in the Box

Pyle PLMRA400 Amplifier, Mounting Hardware, User's Manual

Pyle Marine 4 channel 400W amplifier

Boss PH2.600 Phantom Series 1200 Watts 2 Channels MOSFET Car Amplifier with Remote

Boss PH2.600 Phantom Series 1200 Watts 2 Channels MOSFET Car Amplifier with Remote Review

Boss PH2.600 Phantom Series 1200 Watts 2 Channels MOSFET Car Amplifier with Remote Feature

• Two-channel Phantom amplifier with MOSFET power supply and trimode operation
• Delivers 600 Watts x 2 at 2 ohms; 230 Watts x 2 at 4 ohms; 1200 Watts bridged
• Line and speaker level inputs with variable gain control
• Built-in low- and high-pass variable crossovers; 18dB bass boost
• Includes remote subwoofer level control

New for 2010, Boss Audio's Phantom power amplifiers cover a wide variety of applications. Four- and two-channel full-range models will match perfectly with your speaker system. MOSFET amplifiers deliver plenty of power, while bass boost and built-in high- and low-pass crossovers allow you to customize your cabin acoustics to your taste. The PH2.600 is a two-channel MOSFET amplifier delivering 1200 watts peak power bridged.

A two-channel MOSFET amplifier with 1200 watts peak power. Click to enlarge.

Phantom amps include a remote subwoofer level control.

Trimode Operation
This allows you to send your signal to a tri-way crossover for adding a subwoofer to a two-channel amp.

Remote Subwoofer Level Control
Phantom amps include a remote subwoofer level control for easy level adjustments.

Line/Speaker Level Inputs
Separate line and speaker level inputs mean the amplifier can handle high-level signals from receivers lacking RCA outputs.

Built-In Crossovers
This amplifier features variable high- and low-pass crossovers, so you can adjust the sound to suit whatever speakers you're driving.

Variable Gain Control
Allows you to match the input gain to your receiver for better sound with less distortion.

MOSFET Power Supply
For high performance with low heat.

Bass Boost
Add a little extra low-end power with 0 to +18dB of variable bass boost.

Power and Protection LEDs
Protection LEDs let you know when there's a problem.

What's in the Box
Boss PH2.600 Amplifier, Subwoofer Level Control, User's Manual Boss PH2.600 Phantom 1200 Watt Mosfet 4-Channel Bridgeable Amplifier with Remote

Sound Storm Laboratories AE125M AERO 2500W MOSFET Monoblock Amplifier with High/Low Crossover and Remote Subwoofer Level Control - Black/silver

Sound Storm Laboratories AE125M AERO 2500W MOSFET Monoblock Amplifier with High/Low Crossover and Remote Subwoofer Level Control - Black/silver Review

Sound Storm Laboratories AE125M AERO 2500W MOSFET Monoblock Amplifier with High/Low Crossover and Remote Subwoofer Level Control - Black/silver Feature

• Two OHM stable Class AB monoblock
• Thermal, overload, and speaker short protection
• Remote Subwoofer level control
• MOSFET PWM (Pulse With Modulated) power supply
• Soft turn-on circuit

Sound Storm Laboratories’ engineers set out to create an amplifier series that would offer a solution for restricted space installations and still provide maximum power to an audio system. The result is the AERO series that delivers efficient amplification and accurate, high-quality sound reproduction to virtually any mobile audio system, proving that LOUD THINGS can come in SMALL PACKAGES. SSL is proud to offer five models of window-rattling, bone-jarring monoblock amplifiers designed to work efficiently with any SSL subwoofer as well as six models of power packed multi-channel amplifier models. Remote subwoofer level controls come with all AERO amplifiers giving the user the ability to adjust subwoofer volume on the fly.

Metra XSVI-2004 '97-'2004 Corvette Amplifier Interface

Metra XSVI-2004 '97-'2004 Corvette Amplifier Interface Review

Metra XSVI-2004 '97-'2004 Corvette Amplifier Interface Feature

• Amplifier Interface Harness
• The XSVI Interface series provides a 12V accessory power output that uses data control signals instead of conventional power signals
• R.A.P. (Retained Accessory Power) function is retained

'97-'2004 Corvette amplifier interface

Legacy LA4670BK 4 Channel 2000 Watt Bridgeable Mosfet Amplifier (Black)

Legacy LA4670BK 4 Channel 2000 Watt Bridgeable Mosfet Amplifier (Black) Review

Legacy LA4670BK 4 Channel 2000 Watt Bridgeable Mosfet Amplifier (Black) Feature

• 1 x 2700 Watts Max Output MONO Block
• Fully Adjustable Electronic Crossover
• Variable Bass Boost - (0-12dB @60Hz)
• Soft Turn On/Off Circuit
• 2 Ohm Stable

4 x 500 Watts Max Output2 x 2000 Watts bridged Dual Fully Adjustable Electronic Crossover Soft Turn On/Off Circuit 2 Ohm Stereo Stable idged into 4 ohms Dual MOSFET PWM Power Supplies Variable Gain Control Remote Turn On Heavy Duty Aluminum Alloy Heat Sink Hi/Lo Level MOLEX Input Power & Protection LED’s S/N Ratio: >95dB Frequency Response: 15-30KHz THD: <0.04% Fully Protected Circuitry Dimensions: 11.1''W x 2.2''H x 10.5''L Fuse: 20A x 2

Pioneer GM-6400F 600-Watt, 4-Channel Power Amplifier

Pioneer GM-6400F 600-Watt, 4-Channel Power Amplifier Review

Pioneer GM-6400F 600-Watt, 4-Channel Power Amplifier Feature

• Four-channel car amplifier with 600-watt max power capability
• Delivers 60 watts x 4 at 4 ohms, 150 watts x 2 at 4 ohms, or 75 watts x 2 at 2 ohms
• Selectable low-pass filter (80 Hz, 12 dB per octave)
• Preamp- and speaker-level inputs for connecting to most source units

The 4-channel GM-6400F delivers a whopping 600 watts max (60 watts x 4 or 150 watts x 2 at 4 ohms; 75 watts x 4 at 2 ohms)--plenty of juice to power your high-quality speakers. It's also got built-in 4-channel crossovers. Speaker level inputs for easy connection to an OEM headunit. Oversized power terminals. And a wide input level of 400mV to 6.5V.

Pioneer GM Series Amplifiers A Solid Foundation Adding an amplifier to your vehicle redefines your in-car experience, and can completely change the way you listen to your favorite music. The Pioneer GM series amplifiers are designed to add loads of much-needed volume, chest-thumping power, and heightened clarity. Solid Value GM series amplifiers provide exceptional value. Get more watts-per-dollar compared to competing brands, and save money to build other components in your system. Bridgeable Operation These bridgeable amplifiers also allow for more power as your needs grow. By combining the power of multiple channels to drive different system configurations, you can take your system to a whole new level of sound.

---

GM-6400F Features 600-Watt Max Power Anybody have a problem with more power? We didn't think so. The GM-6400F packs an impressive wallop despite its small size, with 760-watt max power capability. It can run 60 watts x 4 at 4 ohms, 150 watts x 2 at 4 ohms, or 75 watts x 4 at 2 ohms--whichever best fits your system configuration. Built-In Crossover (80Hz Low-Pass Filter) Built into the GM-6400F is a very smart crossover network. It works like a gateway, routing the big bass signals (80Hz or lower, at -12dB/octave) to the speaker that handles them best, filtering out higher-frequency signals to that speaker. This optimizes your system's efficiency and delivers the best possible sound quality. Speaker Level Inputs The GM-6400F's speaker level inputs allow you to connect your OEM unit (or any unit that doesn't have the typical RCA-type inputs) without having to buy add-on adapters. The install goes faster, you save money, and you've got a Pioneer amp in your vehicle. Gain Control What is power without control? To accommodate the varying range of signal levels coming from today's factory and aftermarket radios, all of Pioneer's GM-series amplifiers feature adjustable gain controls. This means that no matter what kind of radio is connected to this amplifier, the appropriate gain control adjustment can be made to ensure loud, clear, distortion-free music. And even if the gain control level is set improperly, Pioneer's Gain Control Caution feature will automatically reduce the amplifier's output until the headunit volume is decreased to acceptable levels. This added layer of protection helps to prevent damage from occurring to the amplifier and the speakers connected to it due to improper gain control adjustments. Bass Boost Selectable 50Hz Bass Boost gives you more control over how your music sounds. It lets you set the optimal bass level for each speaker/sub connected to the GM-6400F, so the tone controls from your headunit can do what they do best. And because this is selectable bass boost, you can set the level at 0dB, 6dB, or 12dB, whichever sounds best to you.

---

GM-6400F Specs

Peak Music Power:	600 Watts
Number of Channels:	4
Load Impedance Capability:	2~8 Ohm (Stereo) 4~8 Ohm (Bridged)
Continuous Power (4 ohm):	60W x 4
Continuous Power (2 ohm):	75W x 4
Continuous Power Bridged (4 ohm):	150W x 1
Frequency Response:	10Hz ~ 50kHz
Total Harmonic Distortion:	<0.03%
Signal-to-Noise Ratio:	>95dB
Dimensions:	10-1/2" x2-1/2" x 13-5/8"
Bridgeable:	Yes
Channel # Capability:	4/3/2
Balanced Isolator Input Circuit:	Yes
RCA Inputs:	4 Channel
Speaker Level Input:	4 Channel
Input Level Control:	Hi-Volt (400mV ~ 6.5v)
Built-in Crossover:	LPF/HPF (Front/Rear Independent)
Crossover Frequency Range:	80Hz, -12dB/Oct.
Warranty:	1 Year

---

Pioneer Car Audio Systems

Pioneer's Mobile Business Group is known for offering the kind of in-car products that make driving more enjoyable by offering high quality audio and video, seamless connectivity and ease-of-use. Its focus is on the development of new digital technologies including audio video, navigation and satellite radio, while maintaining its strong heritage in products for car audio enthusiasts and sound competitors.

---

What's in the Box
Pioneer GM-6400F Amplifier, Input Harness, Installation Hardware, Owner's Manual Pioneer Gm-6400F 600-Watt, 4-Channel Power Amplifier